PURPOSE

The purpose of this document is to outline the instructions for how to install the Self-4000 EMV smart payment reader on a Micrologic Gen 2 Pegasus Kiosk.

EQUIPMENT NEEDED

• EMV Self-4000 Device (enclosed)
• Self-4000 power supply (enclosed)
• Torx T10 Bit 
• Screws: Type M3 18mm long (enclosed)
• Hex 2.5” Bit 
• USB Cable (enclosed)
• 3/8 Nut Driver

PROCESS

1. Turn off the power to the Gen 2 Pegasus Kiosk.
2. Remove the current bracket from the unit, using the 3/8 nut driver.
   • 
3. Install the new bracket in its place, making sure it is as high in the space as it can.
   • 
4. Push the new EMV device through from the front of the unit.
   • 
5. Place the backplate on the unit and secure with 18mm long screws.
   •     
   • 
6. Connect the power supply and USB cable to the new card reader.
7. Contact MisterIT (888-422-7343) for the remaining installation. 
8. They will need to update the RCM version and make sure the reader works.
9. Remove the old kiosk decals and apply the new kiosk decal on the front of the unit.

HISTORY