How to install Epson TM88-IV receipt printer on POS

Modified on: Fri, Mar 14 2025 12:19 PM

PURPOSE

If you receive a replacement Epson receipt printer, follow the steps below to set it up.


PROCESS

  1. Unbox the Epson printer. Inspect the printer and double-check for any damage.
  2. Locate the power cable (left) and USB cable (right).
  3. Plug the power cord into the power supply and plug the other end into an outlet.
  4. Plug one side of the USB cable into the Manager PC
  5. Plug the power cord (left) and the other side of the USB cable (right) into the back of the printer.
  6. Turn the printer on.
  7. Load receipt paper into the printer by pressing the gray button to open the latch. Place the roll inside and pull some of the receipt paper through before closing the lid.
  8. Ensure the Paper Jam and Feed lights are not turned on and that the top light is green.
  9. Contact Mister IT to finish setting up the printer


HISTORY

Revised Date Revised By Revisions
Unknown Andrew Poskey Created Document
8/14/2024 Andrew Poskey Moved to Fresh
3/14/2025 Andrew Poskey Updated title and content formatting
Was this answer helpful?