PURPOSE

Guide on loading receipt paper in the Mister Kiosk receipt printer.

VIDEO

PROCESS

1. Identify the receipt paper arms of the printer. they sit behind the print head.
2. identify the circular pieces at the end of each of the two paper arms.
3. on the back-side of the arms identify the two small tabs holding those outer plastic rings in place.
4. push the tabs towards the outside of the paper arm and in simultaneously to remove the outer plastic rings
5. load the thermal paper roll by slotting the paper stud into the central roll first, then slotting the second one in Ensuring that the paper roll feeds paper over the back of the roll, not under.
6. on the receipt printers print head, remove the blue tape securing the print head closed.
7. Press the release tab on the far right side of the print head. the print head will spring open towards the left. Lay the receipt paper flat in the opened print tray with about an inch of extra paper hanging out.
8. Close the print head. it will click shut when pressed. 
9. The printer should feed about half an inch and cut off the excess. if this happens you've loaded it correctly.
10. print a test page

HISTORY