PURPOSE

Change tunnel controller pulse input in case of a input failure. 

PROCESS

1. On the site server computer, open the Micrologic Tunnel Controller shortcut from the desktop, LogicWash Controller.
   • 
2. if prompted for username/password, check with site management, if site management is unable to provide the necessary info please reach out to Mister IT. 
3. Once we are logged in, the controller web page will look like this:
   • 
   • Here we want to select the 'Settings' option. 
4. At the settings page, we will have an option labeled 'Pulse Input Channel' 
   • 
   • In the drop-down menu, we will have the options to select from 0 - 16
          * 0 means the feature is disabled and the software is reading the pulse from the default pulse input.
   • If you move the pulse to input 3 then the Pulse Input Channel needs to be changed to 3. 
   • On DRB TCS, the input letter corresponds with the input number (e.g., Input C equals Input 3)
5. Once we have our new Pulse Input Channel set we need to: 
   • 
   • Press 'Save' on the right hand side of the page. 
   • Select the 'Backup/Restore' option on the top of the page. 
6. Now we need to select the option 'Commit + Reload' in order for the changes to take effect. 
   • 
     

HISTORY